

June 8,1988


ADDENDUM TO MASTER CAD 1.0 VERSION

1- GRID : You can toggle the Snap to Grid by using the Shift key. 
   EXAMPLE : If you are in the Snap mode and press the Shift key 
   you will turn off the Snap to Grid function.

2- KEYBOARD INPUT : You can temporarily activate the Keyboard    
   Input from  within any Tool, Process, or Function by pressing 
   the Control key and clicking the mouse.

3- RIGHT MOUSE BUTTON : You can interrupt any redraw or save     
   screen by clicking the Right Mouse Button.  You can also      
   change an arcs direction  (Clockwise to       
   Counterclockwise) by clicking it.

4- TRANSPARENCY : You can change the Zoom or Screen Center from  
   within any Tool.

13 May 1991

A low cost A3 plotter is available from

Leonardo computer Systems
Tel 0734 753477
Fax 0734 756575

Called the Graphitec MP3100 it retails at around
500.00 and works fine with Master Cad
Use a serial lead and ensure pin 2 goes to 3 and
visa versa. Set the dip switches as follows;
Switch 1
1,4 ON (Serial interface, 8 Bit)
Switch 2
1,2,5 ON (1+2=2400 baud, Ansi B paper size)
all other switches off.
Use the control panel on this disk to set RS232 to 2400 Baud.

