CENTurbo II (Rev A)

Breaking the speed limit is now permitted

The first Falcon accelerator board at 50 MHz ! *

This card offers everything Falcon is lacking !

The CENTurbo II :

- a new CPU 68030 32-Bit at 50 MHz permanently !
- a SIMM 32-Bit standard socket offers 32-Bit EDO Fast-RAM
 (16 or 32 MB) acceded 7 times quicker than on original
 16 MHz ST-Ram thanks to the 6.2.2.2 BURST accesses of 
 the 030 (32 MB/s) at 50 MHz.
- a socket for a 32-Bit COPROCESSOR (68882-33) at 50 MHz.  
- the DSP of the Falcon is clocked at 50 MHz.
- the BUS of the Falcon is clocked at 50 MHz (the CPU
  accesses at 50 MHz !).
- a 32-Bit Direct CPU BUS Slot (compatible extension of the
  Falcon BUS Slot will be available allowing you to use your
  'old' cards (but not in the original case)).
  Hardware documentation AVAILABLE for Hardware Designers ! 
- on board 64 KB FLASH Eprom containing a new SET UP (NVRAM)
  and the BOOT of DOLMEN FALCON. 
- DOLMEN FALCON. The new and ultra powered MULTITASKING Operating
  Sytem. DOLMEN FALCON is 100% ASM and TOS (AES & VDI) compatible ! 
- a hardware switch enables you to come back to the 100% Falcon
  original mode.  
- Wonderfully designed, the CENTurbo II fits in the original case
  within being embedded in the bus slot, needing only 12 wires soldering.

It is supplied  with DOLMEN FALCON, CENTscreen 3, CENTvidel 3
  and CENTview 2.64 softwares. Like CENTscreen, CECILE, the new
  IDE Hard Disk and SCSI Hard Disk/CD-Rom driver, is a part of
  DOLMEN FALCON.    

The CT2 needs FAST-Ram to run in the TURBO mode.

				Inside EEC	Out of EEC        

CENTurbo II  (without ram)    	1990 FF		1650 FF	      
  + 16 MB			 170 FF		 140 FF     
  + 32 MB       		 350 FF        	 290 FF
  + FPU                          250 FF          210 FF

48 Hours setting up           	 300 FF	  	 250 FF    
Immediate setting up	  	 400 FF	  	 330 FF

Falcon BUS adaptor	  	 200 FF	  	 170 FF                  
(not yet available)

Special prices and SOFTWARE/HARDWARE support for the developers !
Contact us !

Users and developers HOTLINE : +33 344 746 330  
        			From 9:00 pm to 11:00 pm
        			Tuesday to Saturday (included).

Out of EEC prices are excluding the French VAT.
These informations are only given as information.
Prices and features subject to change with no  warnings.

CENTurbo is a trademark of CENTEK.

* AfterBurner is clocked at 32 MHz, CENTurbo 1 & Nemesis are
  clocked at 25 MHz. HADES 040 is clocked at 32 MHz, HADES 060
  is clocked at 60 MHz (bus at 30 MHz).